========================================================================
=== How to update firmware
========================================================================

1. Go to the Admin webpage of the unit you want to update.
   - If this update will reset the unit to factory defaults (noted below, in the changelog)
     download the Hardware Profile if you want to reload those settings.
2. Under "Firmware Update", click "Select Firmware File..."
3. Navigate to and select the .bin file included along with this changelog.
4. Click "Update Firmware".
5. Wait a bit for the file to upload, then the unit will reboot and apply the update.
   - Upload the Hardware Profile from earlier if necessary.

========================================================================
=== NOVIA 236 Changelog
========================================================================

------------------------------------------------------------------------
--- Rev 1.0.0.14 --- This update will not erase your settings
------------------------------------------------------------------------

- Add back in cutoff frequencies to the source options for the GPI

------------------------------------------------------------------------
--- Rev 1.0.0.13 --- This update will not erase your settings
------------------------------------------------------------------------

- Add Primary Audio Source options for the GPI

------------------------------------------------------------------------
--- Rev 1.0.0.12 --- This update will not erase your settings
------------------------------------------------------------------------

- Fix SNMP or unit crashing when setting the input audio source via SNMP

------------------------------------------------------------------------
--- Rev 1.0.0.11 --- This update will not erase your settings
------------------------------------------------------------------------

- External IP address is no longer queried when Dynamic DNS is disabled

------------------------------------------------------------------------
--- Rev 1.0.0.10 --- This update will not erase your settings
------------------------------------------------------------------------

- Fix issue with updating firmware from previous revision

------------------------------------------------------------------------
--- Rev 1.0.0.9 --- This update will not erase your settings
------------------------------------------------------------------------

- Add NTP sync status to Time webpage
- Check NTP packets for validity

------------------------------------------------------------------------
--- Rev 1.0.0.8 --- This update will not erase your settings
------------------------------------------------------------------------

Fixed
- Fixed a very rare issue with TCP checksum that can cause the stream to lose audio for a little while before reconnecting

------------------------------------------------------------------------
--- Rev 1.0.0.7 --- This update will not erase your settings
------------------------------------------------------------------------

Added
- Ability to change the LPF Cutoff Frequency based on a pulse input on one of the GPIs (frequency settable)

------------------------------------------------------------------------
--- Rev 1.0.0.6 --- This update will not erase your settings
------------------------------------------------------------------------

Fixed
- Passwords were not saving to non-volatile memory

------------------------------------------------------------------------
--- Rev 1.0.0.5 --- This update will not erase your settings
------------------------------------------------------------------------

Changed
- Improved web server resilience when connected to over a poor connection:
  Tested on a remote device with browser throttling ("Fast 3G" preset) and 10% each of: packet drop, duplication, out of order, tampering.

------------------------------------------------------------------------
--- Rev 1.0.0.4 --- This update will not erase your settings
------------------------------------------------------------------------

Fixed
- After a power cycle the Positive Peaks would always be set to 100%, not the saved setting

------------------------------------------------------------------------
--- Rev 1.0.0.3 --- This update will not erase your settings
------------------------------------------------------------------------

Fixed
- It was possible for certain emails to not send for servers that don't require a password

------------------------------------------------------------------------
--- Rev 1.0.0.2 --- This update will not erase your settings
------------------------------------------------------------------------

Fixed
- Certain AAC streams could have a stuttering sound during certain passages of audio (particularly speech).

------------------------------------------------------------------------
--- Rev 1.0.0.1 --- This update will not erase your settings
------------------------------------------------------------------------

Fixed
- GPO did not reflect the correct state (active/inactive) after boot until the first alarm occured.